Kohler K-1005-H2 Manual Del Usuario página 4

Lighted User Keypad
Available modes will be illuminated in blue. Active modes will be illuminated in green.
Turns the whirlpool pump on and off.
Power
Outer Ring Rotate the outer ring to the desired mode. The selected mode will flash blue.
Heater Automatically engages when the power icon is selected. Rotate the outer ring until the
heater mode is flashing, then press OK to turn the heater off. Press OK again to turn the
heater back on.
Chromatherapy Rotate the outer ring to select this mode, then press OK. Press the up or down arrow to
Specific Color select a color, then press OK again.
OK Activates the desired mode.
Waterfall Mode Rotate the outer ring to select this mode, then press OK. Press the up or down arrow icons
to increase or decrease the water flow. The indicator bar will display the water flow volume.
Bodyjet Mode Rotate the outer ring to select this mode, then press OK. Press the up or down arrow icons
to increase or decrease the water flow. The indicator bar will display the water flow volume.
Up Arrow Increases the water flow.
Down Arrow Decreases the water flow.
Indicator Bar Displays the water flow volume.
Individual Jets Press 1, 2, 3, 4 or 5 to activate desired sets of bodyjets.
Chromatherapy Rotate the outer ring to select this mode, then press OK. The chromatherapy lights will
Cycle automatically and continuously cycle through eight colors. One cycle through all eight
colors takes approximately one minute.
1032108-5-D
Bodyjet
Waterfall
Mode
Mode
Activates Mode
Selected
Chromatherapy-
Specific Color
Heater
Power
On/Off
Chromatherapy
Cycle
Lighted User Keypad
Increases
Flow
1
Decreases
2
Flow
3
4 Individual
Jets
5
Indicator Bar
4 Kohler Co.