Principal Of Operation - Mityvac MV6410A Serie Instrucciones De Uso Y Mantenimiento

Have a technical
question?
Americas:
If you have questions, or require technical
service, please contact our trained service
technicians at: 1-314-679-4200 ext. 4782
Monday – Friday 7:30 am to 4:15 pm CST
Visit our website at www.mityvac.com for
new products, catalogs, and instructions
for product use.
Need service parts?
To order replacement or service parts, visit
us online at www.mityvacparts.com or call
toll free 1-800-992-9898.
Specifications
Reservoir capacity 5 quarts/1.2 gallons (4.5
(w/ pump)
liters)
Maximum pressure 25 psi (1.7 bar), (170
kPa)

Principal of operation

This equipment is designed and intended for
use as a means to dispense fluid. It utilizes a
manual pressure pump to build pressure in
the reservoir. The pressure forces fluid to
dispense out of the reservoir through a fluid
pickup tube. The output of the fluid pickup
tube is connected to a quick-change coupler,
to which a variety of accessories can be
attached to control or direct the flow of fluid
according to the intended application.
The equipment should never be operated
above a safe level of pressure depending on
the application. A gauge is installed to indi-
cate the pressure in the reservoir, and
should be observed regularly to ensure the
pressure remains at or below what is recom-
mended for the application.
Applications
This equipment is intended for filling reser-
voirs with fluids such as engine coolant,
motor oil, or wiper, automatic transmission,
brake or power steering fluid. However, with
the proper accessories it can safely be used
to pressure bleed hydraulic brake or clutch
systems, or refill or top-off sealed automatic
transmissions.
Precautions
This equipment is designed for servicing a
variety of vehicles in a safe, convenient man-
ner. However, differences in vehicle makes
and models may make it impossible to use
this equipment as it is intended. Do not
attempt to force the use of this equipment
on an application for which it is not designed
to perform.
The procedures documented in this man-
ual are to serve as guidelines for the use of
this equipment. In addition to these guide-
lines, always follow the manufacturer's rec-
ommended procedures when servicing each
unique vehicle.
The use of this equipment is simple and
straightforward if you follow the instructions.
However, always keep in mind that you are
working with a system that may be under
pressure, with fluid that is just waiting to be
expelled. When operating this equipment,
use common sense, and always stop to think
before disconnecting a hose or other
component.
2
• This equipment is intended only for pro-
fessional use by personnel trained in per-
forming the service functions for which it
is has been designed.
• Read carefully and understand all instruc-
tions prior to using equipment.
• Always wear eye protection and proper
clothing when operating equipment
• Do not attempt to modify pressure relief
valve to alter its performance. If pressure
in reservoir ever exceeds 23 psi (1.6 bar),
return it to an authorized service center
for repair or replacement.
• Some fluids, including brake fluid, are cor-
rosive, and proper care should be taken to
protect painted surfaces and skin from
exposure.
• Do not use this equipment with gasoline
or other flammable liquids, or with fluids
at temperatures above 175° F (80° C).
• Consult and follow the vehicle manufac-
turer's recommended procedure when
using this equipment to perform automo-
tive service.
Instructions for use
Fluid dispensing
1 Unscrew the lid w/ pump from the reser-
voir, and fill to desired level with clean
fluid.
2 Reinstall the lid w/ pump onto the reservoir.
NOTE
Two volume scales are on reservoir. One
scale indicates volume when lid w/pump
is removed and one when lid w/pump is
installed.
Note appropriate scale.
NOTE
If fluid is added above MAX FILL line,
reservoir will overflow when lid w/pump
is installed.