Turn It On & Off - Motorola MOTOROKR EQ5 Guia De Inicio Rapido

Ocultar thumbs Ver también para MOTOROKR EQ5:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

charge your speaker
You'll need to charge your speaker's battery for a
charge your speaker
minimum of 1 hour using the included charger.
Note:
You can use the speaker while the battery charges.
1
Plug the charger into the charging port on your
speaker, as shown.
The Charging indicator light turns red when battery
is charging. It may take up to 1 minute for the
indicator light to turn on. When the speaker's battery
is fully charged, the indicator light turns green.
2
Disconnect the charger.
Note:
This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, expected life
of the rechargeable battery is approximately 500 charges.
connect wirelessly
To listen to your music via Bluetooth wireless
connect wirelessly
connection, as well as make and receive handsfree
calls, you need to pair (link) your speaker with your
Bluetooth phone and/or music player.
1
Turn off any Bluetooth devices previously paired
with your speaker.
2
Turn on the Bluetooth feature on your Bluetooth
phone or music player.
3
Turn on your speaker.
The main indicator light is steadily lit in blue to
indicate the speaker is in discoverable mode.
4
Place phone or music player in Bluetooth search
mode.
The phone or music player searches for your
speaker.
5
Select Motorola EQ5 from search results on your
phone or music player.
6
Select OK or Yes to pair your speaker with your
phone or music player.
7
If prompted, enter 0000 for passkey.
To turn your speaker on and off, slide the Power switch
turn it on & off
to the ON position. The main indicator light flashes 3
times.
5
6
connect wirelessly
When your speaker successfully pairs and connects with
your phone or music player, the main indicator light
flashes blue and purple. Music playing from your
connected music source is heard on your speaker.
Notes:
• After successfully pairing your speaker and
Bluetooth device, you don't need to repeat these
steps. For each use, ensure that your speaker is
turned ON and that your device's Bluetooth
feature is ON.
• Some music devices will automatically attempt
to play music when the EQ5 re-connects to it.
7
8
turn it on & off

Publicidad

Tabla de contenido
loading

Tabla de contenido