Lock the spindle and
assembling metal cutting
disc/abrasive cutting disc /
grinding disc
NOTE: Press and
hold the spindle lock
button to lock the
spindle.
NOTE: Make sure that
the metal cutting
disc/abrasive cutting disc
/grinding disc is
assembled firmly.
WARNING! Before any
work on the machine
itself, remove the battery
pack.
Lock the spindle and
removing metal cutting
disc/abrasive cutting disc /
grinding disc
Adjusting Wheel Guard for
grinding/cutting
Note: Remove the
battery pack before
making any changes
to the tool. For work
with grinding or cutting
discs, the protection
guard must be mounted.
Use the correct type of
disc for your application.
If the power tool is
intended to perform
any cut-off operations,
a guard specific for
this operation must be
installed.
Cordless Mini Cutter
Installing the Battery Pack
pack, make sure that the
ON/OFF Switch is in OFF
position.
See Fig. B
pack, do not insert the
battery pack until the
metal cutting disc/
abrasive cutting disc /
grinding disc comes to a
complete stop!
OPERATION
Using On/Off Switch
Note: Depress the On/
Off switch forward to
lock-on button. Your
switch is now locked on
See Fig. C
for continuous use.
Hand grip areas
Rough Grinding
for rough grinding
applications. This can
cause bodily damaged by
using the tool for wrong
See Fig.
applications.
D1,D2,D3
Cutting
WARNING: Before
inserting the battery
WARNING: When
replacing the battery
WARNING! Never
use a cutting disc
See Fig. E
See Fig. F
See Fig. G
13
See Fig. H
See Fig. I
EN