ARENDO 304908 Manual Del Usuario página 10

4.2 Thermometer mode
Move the "Timer/Temperature" switch (6) on the back of the device in the direc-
tion of "COOK" to enable the thermometer mode.
• Connect the thermometer cable to the device.
• The temperature at the end of the probe is shown on the left in the display
("THERMO TEMP").
• When using the device in an oven or grill, insert the probe with the wire
into the device where you want to measure the temperature. The ther-
mometer has to be outside the oven or grill. Do not expose the thermome-
ter to high temperatures.
• Be careful in case of open fire: This wire is heat-resistant but not in case of
an open fire. In this case, you need to protect the wire.
• To use the alarm setting, adjust the temperature at the right of the display
(SET TEMP) using the "Min/UP" and "Sec/DOWN" buttons. You hear an
alarm once the set temperature is reached.
• Be careful when using the device as the probe and wire can be very hot.
• The probe (but not the wire) can be immersed in any liquid such as oil or
water.
10
English