HoMedics TOTALCLEAN Guia De Inicio Rapido

READ AND SAVE THESE INSTRUCTIONS
HOW TO USE
Plug into a household electrical outlet and press top button to turn on.
Press the power button to turn the sanitizer off. The power light will turn off and the night-light will not operate.
QUICK-START GUIDE
1
x
Blue light/Auto mode
• Press the power button once to enter auto mode. The power
light will glow blue.
• The sterilization process will operate for 1 hour and turn off.
• The night-light will operate for 5 minutes and turn off.
• When the motion sensor detects human motion, the
sterilization process will operate for 1 hour and the
night-light will activate based on low light conditions for
5 minutes and turn off unless the night-light is set to off.
2
x
Green light/Continuous on mode
• Press the power button twice to enter continuous mode. The
power light will glow green.
• The sterilization process is always on and the night-light will
operate for 5 minutes and turn off.
• When the motion sensor detects human motion, the
night-light will activate based on low light conditions for
5 minutes and turn off unless the night-light is set to off.
Night-light operation
HOLD FOR
2 SECONDS
• The night-light has 3 brightness levels.
• While the product is on, press and hold the power button for
2 seconds. The night-light brightness will cycle through the
low, medium, high, or off settings. Release the power button
at the desired brightness to select your brightness setting.
• The cycle will start from the previous setting unless the
product is unplugged. If unplugged, it will start cycling from
the low setting.
QS-APP20
Made in China