Steren COM-252 Manual De Instrucciones página 32

CONNECTION TO A LCD OR CRT MONITOR
After installing, you will have the TV function only.
1.- Place the main unit close to the LCD or CRT monitor.
2.- Connect the antenna or CATV cable to RF connector.
3.- Connect a VGA cable from the LCD or CRT monitor to VGA out
connector. Screw it firmly to avoid distortions.
4.- Plug the speaker into Audio out connector (must have a 3.5mm
cable) (if you do not connect a external antenna, device will use the
internal).
5.- Plug the AC adapter into DC5V connector, then plug it into an outlet.
6.- Turn the monitor on. The screen will display an image.
Monitor or LCD
AC power adapter
VGA Cable
Audio cable
Speaker
Antenna or Cable
ENGLISH-09