Telstar TBL003710MD Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Please read all the safety information, warnings, and instructional material found in this booklet before getting
started. Set your machine on a dry, level surface. Make sure that the power switch is set to Off, and that the
machine is plugged into a grounded electrical outlet. Then, follow the cleaning instructions on page 6 to
prepare your machine for use. Always clean your machine before the first use.
Warning
To avoid the risk of serious injury when using your blender, basic safety precautions should be followed, including
the following.
Read all instructions, safeguards, and warnings before operating blender
1. There is a potential injury from misuse. Please handle it with care.
2. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling
or cleaning
3.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children
4. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction concerning use of the appliance
in a safe way and if they understand the hazards involved
5. Children shall not play with the appliance
6.
Be careful when handing the sharp cutting blades, emptying the bowl and during cleaning
7. Be careful if hot liquid is poured into blender as it can be ejected out of the appliance due to a sudden
steaming
8.
Switch off the appliance and disconnect from supply before changing accessories or approaching parts
that move in use
9. This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
10. CAUTION: Ensure that the blender is switched off before removing
11. A protection system is designed; blending process would be stopped automatically after 3 minutes running
at any speed setting.
Note
The failure to follow any of the important safeguards and the important instructions for safe use is a misuse of
your Main power blender that can void your warranty and create the risk of serious injury.
10
BLENDER
TBL003710MD

Publicidad

Tabla de contenido
loading

Tabla de contenido