Telstar TBL003710MD Manual De Instrucciones página 15

BLENDER
TBL003710MD
Normal Cleaning:
1. Fill the container half full with warm water and add a couple drops of liquid dish washing detergent to the
container.
2.
Push the lid completely.
3. Select variable speed low. Turn machine on and slowly increase speed to variable speed to High.
4. Run the machine on High speed for 30 to 60 seconds.
5. Turn off the machine, and rinse and drain the container.
Sanitize:
1. Follow Normal Cleaning instructions above.
2. Fill the container half full with water and 1 1/2 teaspoons of liquid bleach.
3. Push the lid completely in jar.
4. Select variable speed low. Turn machine on and slowly increase speed to variable speed, then to High.
5. Run the machine on High speed for 30 to 60 seconds.
6. Turn off the machine, and allow mixture to stand in the container for an additional 1 1/2 minutes.
7. Pour bleach mixture out. Allow container to air dry.
8. Do not rinse after sanitizing.
Lid, Measuring Cup
Separate the lid and lid plug. Wash the parts in warm soapy water. Rinse clean under running water, and dry.
Reassemble before use.
Motor Base
1. Unplug the power cord
2. Wash the outside surface with a damp soft cloth or sponge, which has been rinsed in a mild solution of liquid
detergent and warm water. Do not place the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so they work freely. They may become sticky from use. Use a moistened
cotton swab to clean the grooves around the water-
shielded switches. Immediately dry any excess water.
5.Polish with a soft cloth.
15