Control Panel - Telstar TBL003710MD Manual De Instrucciones

CONTROL PANEL

1. On/Off Switch: The On/Off (or Power) Switch is on the right-hand side of the machine base. The On/Off
Switch controls the power to the machine. BEFORE moving the On/Off Switch to the "On" position, make sure
the Rotary knob.
2. Rotary knob: The Variable Speed Dial selects blade rotation speeds from low to high. Always begin the
blending process with the Rotary knob set to low. Make sure that the On/Off Switch is in the "On" position and
rotate the Rotary knob to the desired speed setting. To stop the machine, rotate the Rotary knob to "Stop". Or
move the On/Off switch back to "OFF" position. If the Rotary knob.
3. Pulse Switch: Pressing down on the Pulse Switch to "PULSE" will cause the machine to blend at the speed
setting when Rotary knob at any speed setting.
Caution
Measuring cup: Insert through the lid and secure by turning clockwise. Remove the measuring cup to use the
tamper or add ingredients.
WARNING:
Rotating Blades Can Cause Severe Injury. DO NOT reach into container while machine is running.
Blade Container: Designed for processing liquids, including juice, frozen mixtures, sauces,
soups, purées, batters, and for wet chopping. The wet blades can also grind grain and
knead dough,
12
BLENDER
TBL003710MD