Bluetooth Operation; Speaker Phone Operation - Sunstech SPBT610 Manual De Instrucciones

OVERVIEW
Multifunction switch:
LED
Volume+ control + phone
indicator
operation
Mic

BLUETOOTH OPERATION

1. Turn on the speaker. The blue indicator light will flash to detect Bluetooth enabled devices near you. The blue
indicator light will go out if no Bluetooth device is detected within 5 minutes.
2. Pair the SPBT610 with the desired Bluetooth device.
3. Play/pause as desired by pressing
4. Push to V+ shortly to select the next song, keep pushing to decrease the volume.
5. Push to V– shortly to select the previous song, keep pushing to increase the volume.
6. When you want to play music or movie from another Bluetooth device, disconnect the SPBT610 and
restart the Bluetooth speaker and re-pair.
Tip: If you need to pair the SPBT610 with another Bluetooth device, disconnect the SPBT610 from the
Bluetooth device list firstly.
AUX PLAYBACK OPERATION
1. Turn on the speaker.
2. Insert the 3.5mm audio cable into the aux jack on the back of the speaker, connecting to any audio device such
as mobile phones or computers with the other port.
3. Press to play/ pause.
4. Keep pushing V– to decrease the volume.
5. Keep pushing V+ to increase the volume.
TF PLAYBACK OPERATION
1. Plug in TF card.
2. Keep pressing
3. Press to play/ pause.
4. Keep pushing the push button to V– to decrease the volume.
5. Keep pushing the pushbutton to V+ to increase the volume.
6. Push to last track.
7. Push to next track.

SPEAKER PHONE OPERATION

Press to answer an incoming call.
Keep pessing to reject an incoming call.
INSTRUCTION MANUAL
Mirco USB port
.
to swift TF mode.
SPBT610
Aux Jack
TF card slot
1
ON/Off
Switch