Control Elements And Interfaces; Fitting The Screw-Type Meter - Honeywell Home EW600 Serie Traducción Del Manual De Servicio Y Montaje

Control elements and interfaces

(1) The display is always off as standard (sleep mode).
(7) Attachment holes for external optical modules and external cables
(8) User protection and slots for external cable connections

Fitting the screw-type meter

• Dismantle the flushing tube or existing meter
• Remove old seals
• Dismantle temperature sensor if appropriate
• Remove threaded protective caps
Always use new seals
when installing a new meter!
Tighten screw fitting with new seal to max.
•
45 Nm tightening torque
Press the < H > or < V > key
briefly to open the fast readout
display loop.
Press the < H > or < V > key
longer than 3 seconds to open
the level operating scheme.
(2) <H> key (horizontal)
(3) <V> key (vertical)
(4) IrDA interface
(5) Interface cover
(6) Module interface
MU2H-0491ge23 R1020 29 EN