lbx ELFH – 400 – 001 Manual De Usuario página 5

MOVABLE BAFFLE
WITH SILICONE MAT
RUNNING THE GEL
1. Mix the sample with the buffer solution.
2. Pour the buffer into the tank until the gel is completely submerged. This will help the
experiment be completed in a shorter time and with better quality results.
3. Load the samples into the wells using pipettes. Multi-channel pipettes can be used with MC
compatible combs.
4. Carefully cover the tank with the lid and connect it to a voltage supply.
5. Run the electrophoresis. Note that gels are typically run under 90-150V. The maximum
voltage is indicated on the serial badge of each unit. Higher voltages allow for a faster
electrophoresis but with poorer quality results.
GEL TRAY
WRENCH