SSS Siedle HTV 840-02 Instrucciones De Empleo página 7

Display settings
• Brightness (display)
adjustable in 6 steps
• Brightness (video)
adjustable in 21 steps
• Contrast (video)
adjustable in 21 steps
• Gamma (video)
adjustable in 101 steps
• Colour (video)
adjustable in 21 steps
Delay times
• Video turn-on delay
Monitor is switched on with a
time-delay. Adjustable in a range
from 0 to 10 seconds.
• Record delay
Image is saved with a time-delay.
Servicing
Settings for the electrical installer.
Quit menu
The monitor switches off after the
set OFF delay time.
Intercom functions
For internal communication in
the house, the telephone offers
additional functions. To allow these
functions to be used, they must
be programmed by the electrical
installer.
• Rerouting
Forwards door calls to another
telephone.
• Doormatic
The door release is automatically
opened after pressing the door
bell.
• Callback
If an internal caller is unable to get
through to you, he can use the
callback function. The relevant LED
then lights up at your telephone
until you call back.
• Setting an internal callback
If you make an internal call and
the user does not pick up, you can
request a callback. To do this, press
the flashing button twice.
Individual assignment
On page 34, individual functions
can be documented for the device.
Care of your phone
Only ever clean your telephone
using a soft cloth dampened with
mild soap solution. Dry cleaning,
aggressive cleaning agents and
abrasives can damage the surface.
Detailed care instructions are
located in the download area of
www.siedle.com.
Servicing
Statutory warranty conditions
apply. Exchange of the device in
case of servicing must be per-
formed by your electrical installer.
7