autocom OBD Manual Del Usuario página 24

Manual
10.4.3.1.1.3 Display the Flight recorder Session
When the Flight recoder session is uploaded a graph window will open. At first there are no
parameters selected and View mode (1) is set to Combined. In Combined view mode the selected
parameters (2) are displayed in the same graph window. Scale (3) is set in percentage (%) where
maximum value is displayed as 100 % and minimum value is displayed as 0 %. In Split view
mode all parameters are displayed in separate graph windows. In this case Scale is actual value.
There is a marker (4) in the graph window to get the actual value in the parameters list. Triggers
can set during flight recording. This is done by clicking the Flight Rec. button on the VCI (See
chapter 4.3). The trigger points are displayed as lines in the graph window (5). The Graph
window can be zoomed. Either by using the scroll wheel on the mouse, to zoom in and out, or by
double click the left button on the mouse to zoom in and double click the right button on the
mouse to zoom out. It is possible to adjust the areas of the window by moving the line between
Graph window and parameters list (6). Exit the flight recorder function by clicking the back
button in menu 1 (7).
(4)
(3)
(5) (5)
(6)
(1)
(2)
(7)
24