Stryker WiSe Guia Del Usuario página 9

15. Do not operate with the glass display screen facing downward.
16. Keep the unit away from equipment that uses strong magnets (i.e., large
loudspeakers).
17. Do not touch the patient with signal input or output connectors.
Equipment with SIP/SOP connectors should either comply with
IEC 60601-1 and/or IEC 60601-1-1 harmonized national standards or
the combination should be evaluated for safety.
18. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
unit.
Note
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This unit generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. There is no guarantee that interference will
not occur in a particular installation, which can be determined by
turning the unit off and on. The user is encouraged to try to correct the
interference by one or more of the following measures:
19. To ensure electromagnetic compatibility, refer to the "Electromagnetic
Compatibility" section of this manual. The WiSe™ 26" HDTV Surgical
Display (model 0240030970) must be installed and operated according
to the EMC information provided in this manual.
The WiSe™ 26" HDTV Surgical Display (model 0240030970 has been tested
under the UL 60601-1 standard and is UL listed for medical application.
The warranty is void if any of these warnings or cautions are disregarded.
This unit has been tested and found to comply with the limit
• Reorient or relocate the receiving unit.
• Increase the separation distance between the units.
• Connect the unit to an outlet on a circuit different from that
to which the other unit(s) are connected.
• Consult the manufacturer or field service technician for help.
5