6
9
10
2
Voltage: 127~220v
Battery voltage: 9,6v
Charging time: 3h - 5h
Chuck capacity: 0,8mm - 10mm
FITTING AND REMOVING THE BATTERY
To fit the battery, connect it directly
01
under the base of the screwdriver until
you hear a click (PIC 1).
26
PARTS LIST
7
8
3
TECHNICAL SPECIFICATIONS
1/32" - 3/8"
ASSEMBLY INSTRUCTIONS
1
4
1. Battery drill / screwdriver
2. Flat and cross bit
3. NiCd 9,6V battery
4. Bivolt charger
5. Battery charger base
6. Chuck
7. Torque selector
8. Speed selector
9. Direction selector
10. Activate trigger
Aproximated weight: 1,4Kg
Maximum torque: 8Nm
Speed: 0-350 / 0-1100RPM
Measures: 21,5 x 25 x 8,4cm
To remove the battery, press the side
02
buttons and pull the battery in the
opposite directionto the screwdriver.
5