General Operating Instructions - Zuvo 100 Serie Manual Del Usuario

General
100 Series model
Quick Guide
Buzzer
4 beeps
every 30 seconds
1 beep
every 10 seconds
No beep
No beep
2 beeps
(when faucet turned on)
3 beeps
(when faucet turned on)
5 beeps every 30 seconds
(courtesy reminder if beverage faucet is left on
(beginning after 5 gallons))
Page 4
The Zuvo Water Filtration System is designed with smart
technology to let you know you need to flush water
through a new filter, or it's time to replace your filter to
ensure optimal water cleansing. The 100 Series models
have a built-in buzzer. Check the back of your Zuvo
system for the model number.
Buzzer
The built-in buzzer is designed for five different
conditions including:
• Initial flush needed / new filter installed
• Normal operation
• Less than 2 weeks or approximately 40 gallons
(typical usage) of filter life remaining
• Filter replacement needed
• Trouble found
The Zuvo system senses the filter capacity and monitors
water usage. Based on typical usage, the system will
alert you when about two weeks, or approximately 40
gallons, of filter life remain. Once the filter has reached
capacity, the system will alert you to change the filter.
The system will not operate if the same used-up filter is
removed from the Zuvo system and re-inserted.
Beverage
Action Required
Faucet
Off Turn on beverage faucet to start filter flushing
Turn off beverage faucet once buzzer stops
On
beeping
On OK
Off OK
On Change filter soon
On Change filter immediately
On Turn off beverage faucet