Turn On Delay - IVAC Pro TOOL Guia Del Usuario

System Address Programming.
All switches shown in Off position.
System
Address
A
B
C
D

5.3 Turn On Delay

Upon receiving a command from an 'iVAC Pro Tool' to turn
on the power to a dust collection system, there is a delay of
1.5 seconds before the power is turned on. This delay is to
avoid two power surges occurring at the same time on an
AC mains circuit that is feeding both the power tool and the
dust collection system. This feature is to avoid tripping the
main circuit breaker.
S1 S2
Off Off
On Off
Off On
On On