Turn Off Time - IVAC Pro TOOL Guia Del Usuario

5.4 Turn Off Time

The Turn Off time is to allow the dust collection system to
continue to run after a power tool has been turned off. This
feature is to clear up any remaining debris at the power tool
and in the ducting and may also be used to avoid quick
cycling of the dust collection system.
The Turn Off time can be set by means of the Program Switch
to 0 seconds, 5 seconds, 15 seconds or 45 seconds.
Note. If the Turn Off time is set at 0 seconds, the Turn On
delay is also set to 0 seconds.
Turn Off Time Programming.
All switches shown in Off position.
Time
5 Seconds
15 Seconds
45 Seconds
0 Seconds
S5 S6
Off Off
On Off
Off On
On On