Kohler K-941 Diagrama De Instalación página 2

27-1/2"
(699 mm)
16"
(406 mm)
Product Information
Applicable product:
Drop-in bath
Drop-in bath – 10 pack
Fixture*:
Bathing Well:
Basin area, top 51-7/16" (1307 mm) x 21-15/16" (557
mm)
Basin area, bottom 43-7/8" (1114 mm) x 17-5/16" (440 mm)
Weight 232 lbs (111.4 kg)
To Overflow:
Water depth 11-5/16" (287 mm)
Capacity 33.4 gal (126.4 L)
* Approximate measurements for comparison only.
Drop-in cut-out 57-1/2" (1461 mm) x 26" (660 mm)
1169409-1-B
59" (1499 mm)
11-1/2" (292 mm)
1/4" (6 mm)
2-7/8"
(73 mm)
1-1/2" OD
K-941
K-P941
No change in measurement if connected with
drain illustrated. (K-7161-AF)
13-3/4"
(349 mm)
3-5/8"
(92 mm)
3-5/16"
(84 mm)
16-3/4"
(425 mm)
3"
(76 mm)
Required accessories:
Clearflo pop-up bath drain OR
Clearflo cable bath drain with PVC tubing OR
Clearflo cable bath drain, less PVC tubing
Optional accessories:
Adjustable feet
Notes
Install this product according to the installation guide.
Floor support under bath must provide for minimum of 50
lbs/square foot (242 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
This bath is designed for drop-in installation only. It is not suited
for use in a three-wall alcove with an overhead shower.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
2
9/16"
(14 mm)
5-3/4"
11-7/8"
(146 mm)
(302 mm)
K-7161-AF
K-7213
K-7214
K-18416
Kohler Co.