Grandstream GXP2100 Guia De Inicio Rapido página 4

Tips For Using the Keypad:
1. To access the MENU, press the round MENU button.
2. Navigate the menu by using the UP/DOWN and LEFT/RIGHT buttons.
3. Press the round MENU button to confirm a menu selection.
4. Delete an entry by pressing the MUTE button.
5. The phone automatically exits MENU mode with an incoming call, the phone
goes off-hook or the MENU mode is left idle for 20 seconds.
PHONE CONFIGURATION:
Configure the GXP2100 using a Web Browser:
Ensure your phone is powered up and connected to the Internet.
1.
2. Press MENU button to go into menu of the phone.
3. Press the "down" arrow button to "Status" and press MENU button to see
the IP address.
4. Type the phone's IP address in your PC browser. (See figure on right)
5. The default administrator password is "admin"; the default end-user pass-
word is "123".
5
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Configure the GXP2100 using the Keypad:
1. Make sure the phone is idle
2. Press the "MENU" button to access the keypad MENU to configure the phone.
3. Select MENU-> Config, to configure settings for SIP Proxy, Outbound Proxy,
SIP User ID, SIP Auth ID, SIP Password
4. Follow MENU options to configure the basic features of the phone.
For example: the IP address if using a static IP. For details, please check GXP
Series User Manual.
5. Please contact your ITSP (Internet Telephony Service Provider) for additional
settings that may be necessary to configure the phone.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
6