Windows And Tabs; The Start Window - Balluff BTL7-S510 Serie Manual

BTL7-S510(B)-... / BTL7-S5 _ _ C-... / BTL7-S5 _ _ D-...
BTL7 Configuration Tool
3

Windows and tabs

3.1

The Start window

3.1.1 Establish a connection
When starting, the BTL7 Configuration Tool establishes the
connection to the communication box and to the
connected BTL. The data and BTL configuration are read
and displayed in the main window.
The individual steps are shown in the Start window:
Connecting... Connection to the communication box
–
is established.
– Opening... Connection to the BTL is established.
– Reading... BTL data is read.
If the action can be successfully completed, the main
window is displayed.
6 english
3.1.2 A connection cannot be made
If no connection to the communication box or to the BTL
can be established, this message will appear on the start
screen and the main window is not shown.
► Check the USB connection, unplug and plug in the
cable on the PC, if necessary.
⇒ The BTL7 Configuration Tool attempts again to
establish the connection.
► Check connection between the BTL and the
communication box, reconnect if necessary.
⇒ The BTL7 Configuration Tool attempts again to
contact the BTL.
► Switch to the Demo version.
⇒ A self-running demo is started. A BTL does not
need to be connected.
► Quit program (e
).
xIt
⇒ The BTL7 Configuration Tool is closed.
Please contact our service center if you still cannot
establish a connection.