Output Tab; Data Format - Balluff BTL7-S510 Serie Manual

BTL7-S510(B)-... / BTL7-S5 _ _ C-... / BTL7-S5 _ _ D-...
BTL7 Configuration Tool
3
Windows and tabs (continued)
3.4

Output tab

3.4.1 Function
You can select a function that will be shown in the curve.
The following functions can be selected:
Position: Position in the measuring range.
Velocity: Velocity of the magnet, with the sign indicating
the direction of motion. A movement from the starting
point to end point is output with a positive sign; a
movement from the end point to the starting point is
output with a negative sign.
Velocity (no sign): Velocity of the magnet, but the
direction of motion cannot be read.
Differential position: Distance between two magnets.
Selection is only possible if two magnets have been
selected (see Magnet tab on page 9).
Differential velocity: Relative velocity between two
magnets. Selection is only possible if two magnets have
been selected (see Magnet tab on page 9).
10 english
3.4.2

Data format

Setting the data format:
Number of bits: You can set values from 16 to 32 bits.
Coding: You can choose between binary code and Gray
code.
Setting the data format
► Set values using the spin controls.
Or
► Enter values and confirm each by pressing <Enter>.