Safety Information (Continued)
LOADING THE TOOL
1.
Do not load the tool with fasteners when any one of
the operating controls is activated.
2.
Never place a hand or any part of body in the fastener
discharge area of the tool.
3.
Never point tool at anyone.
Warranty
Estwing Pneumatic Nail G uns Warranties
5 Y ear Professional T ool Warranty
The Estwing Tool limited warranty extends exclusively to the original purchaser of the Estwing Product, begins on the
date of purchase and excludes wearable parts. During the warranty period Prime Global Products, Inc. (PGP) expressly
warrants that the Estwing Product is free from defect in materials and workmanship subject to the exceptions and
limitations contained herein. PGP shall at its option, repair, replace, or offer a full refund for a Estwing Product that has a
defect in materials or workmanship.
90 D ay Wearable Parts Warranty
The Estwing wearable parts limited warranty extends exclusively to the original purchaser of the Estwing Product and
begins on the date of purchase, and includes driver blades, bumpers, O-rings, pistons, piston rings, and gaskets. During
the warranty period PGP expressly warrants that the Estwing Product is free from defect in materials and workmanship
subject to the exceptions and limitations contained herein. PGP shall at its option, repair, replace, or offer a full refund for
a Estwing Product that has a defect in materials or workmanship.
A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO
MAKE A WARRANTY CLAIM. Warranty registration is also required and can be accomplished through On-Line Product
Registration at www.primeglobalproducts.com, select SUPPORT, select PRODUCT REGISTRATION. To make a
warranty claim, the original purchaser must return the Estwing Nail Gun, postage prepaid and insured, with proof of
purchase to PGP or any of its authorized service centers. For questions please call 1-888-669-5672. Other than the
postage and insurance requirement, no charge will be made for repairs covered by this warranty.
Warranty E xclusions
These Warranties do not apply where:
Repairs or alterations have been made, or attempted, by others, and/or the unauthorized use of non-conforming
parts or accessories.
Repairs are required due to normal wear and tear.
The Nail Gun has been abused, misused, improperly maintained or operated, including: the failure to use clean, dry,
regulated compressed air at the recommended pressure; accidents caused by use of the Estwing Product after
partial failure.
The Estwing Product is used commercially in assembly lines or production lines. The Estwing Product is intended for
use by individuals and these warranties do not extend to such commercial uses.
WARNING: The
warnings
and
precautions
discussed above cannot cover all possible
conditions and situations that may occur
must be understood by the user that common
sense and caution are factors which cannot be
built into this product but must be supplied by
,
the user
.
06
NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THAN THE ABOVE WARRANTIES IS MADE
WITH REGARD TO THIS ESTWING PRODUCT. ANY IMPLIED WARRANTIES WILL BE LIMITED IN DURATION TO THE
APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
.
It
AN IMPLIED WARRANTY LASTS, SO THE ABOVE MAY NOT APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND
EXCLUSIVELY AS STATED ABOVE. PGP SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, OR SPECIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO
EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR
OTHERWISE, SHALL PGP'S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN RISE TO THE
CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE
EXIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE. NO EMPLOYEE OR REPRESENTATION OF PGP, OR ANY
DISTRIBUTOR OR DEALER IS AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION OF THIS WARRANTY.
These warranties give you specific legal rights. You may also have other rights which vary from state to state.
1.
This
tool
kit
has
assembled.
2.
Carefully remove the tool and any accessories from
the box.
Inspect the tool carefully to make sure no breakage
3.
or damage occurred during shipping.
4.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
5.
If any parts are damaged or missing, please call
1-888-669-5672.
1.
Air inlet: 1/4 inch NPT
2.
Magazine capacity: L Cleat: 100 pcs Staple: 90 pcs
3.
Weight: 8.0 lbs
4.
Maximum pressure: 115 psi
Pressure range: 70 psi – 115 psi
5.
6.
Pin size range: 1-1/2 in. to 2 in.
Warranty(Continued)
Unpacking
been
shipped
completely
WARNING: If any parts are missing, do not
operate the tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
WARNING: Do not attempt to modify the tool or
create accessories not recommended for use
with
the
modification is misuse and could result in
hazardous condition leading to possible serious
personal injury.
Specifications
7.2mm (9/32")
38 mm
1-1/2
45 mm
1-3/4
"
50 mm
2
(16 Ga. L Cleats)
Compatible with generic brands of 15.5 gauge staples & 16
gauge L-cleats.
07
tool.
Any
such
alteration
or
12.7mm (1/2")
"
"
38 mm
1-1/2
"
"
45 mm
1-3/4
"
50 mm
2
(15.5 Ga. Staples)
WWW.PR IME G LO BALPRO DU CTS.C O M
Please contact 1-888-669-5672 for further assistance.