-
When using the appliance with stand, be sure that the stand is standing stable,
because the danger of burns when it falls
Be sure that the cable is placed that way that it cannot be pulled or touched during usage.
-
-
Always unplug the appliance and cool it down before the device is carried away. Never
carry it when it is hot.
-
Unplug the appliance after each usage or before cleaning.
-
Always place the oil tray bellow the grill plate.
Thermostat:
With the thermostat the temperature of the grill plate can be adjusted. The
Numbers on the thermostat knob have following meaning:
1 = thermostat switched on 2 = keeping warm 3 - 4 = grilling with low temperature ( for fish etc.)
4 = grilling on medium temperature (for chicken etc.) 5 = grilling on max. temperature
Control Lamp:
When the appliance is plugged in and the thermostat is adjusted, the control lamp is shining.
When the temperature is achieved, the lamp goes off.
Grill preparations:
Oil the grill slightly before the usage. This makes it more easy to turn the food. Then heat up
the device for ca 10 min; the thermostat on maximum level. The food should be not frozen
during grilling. Please use the appliance only with the drip tray.
Never cover the appliance with aluminium foil, because the heat cannot get away from the
heating element.
Never cut on the grill surface because the coating can be damaged.
During grilling the bonnet can be placed on the plate or can be hanged at the edge to be used
as a wind shield.
Is the appliance used as a table top model, the cover can only put on the plate.
Careful !:
Steam from the food can emerge when the lid is opened. Danger of burns!
3