Removing The Rechargeable Battery - Remington Style Serie Manual Del Usuario

REMOVING THE RECHARGEABLE BATTERY

We strongly recommend that a professional removes the rechargeable battery. Parts of the
shaver case, and tools have sharp edges and may cause injury if not handled correctly.
• The rechargeable battery must be removed from the appliance before it is scrapped.
• Disconnect the charging adapter before removing the battery.
1. Run the shaver until the motor stops.
2. Unplug the shaver.
3. Open the hair pocket and remove 1 screw from the top.
4. Remove the three drive shafts and the shaver head
5. Unscrew the 2 screws on the top housing.
6. Carefully pry off the front housing.
7. Unscrew the 6 screws on the inner housing.
8. Carefully pry off the back housing.
9. Lift the battery carrier and circuit board out of the shaver body then cut the tabs
holding the batteries to the circuit board.
• Used batteries must be removed from the appliance and disposed of at an appropriate
official recycling/collection point.
• Do not attempt to operate the shaver once you have opened it.
RECYCLING
W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
7