Tools And Materials; Before You Begin - Kohler K-2834 Guia De Instalacion

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Adjustable
Jigsaw
Wrench
Drill
Pencil
Masking
Scissors
Tape

Before You Begin

CAUTION: Risk of personal injury or product damage. Cast
iron lavatories are very heavy. Get help lifting the lavatory
into place.
CAUTION: Risk of product damage. When securing the
lavatory to the countertop/vanity, use the type of sealant
recommended by the countertop/vanity manufacturer. Refer
to the countertop/vanity manufacturer's instructions for this
information, as certain sealants may damage the finish of the
countertop/vanity.
Observe all local plumbing and building codes.
If you are replacing an existing lavatory, turn off the water supply
to the faucet. Open the faucet valves to relieve pressure, then
disconnect the supply lines. Disconnect the drain assembly,
remove the trap, then remove the lavatory.
For new installations, ensure the water supply lines, drain piping,
vanity, and/or countertop is in place before proceeding with the
lavatory installation.
1061942-2-B
Plus:
• Template (supplied)
• Rags or Paper Toweling
• Assorted Drill Bits
Safety
• Marker
Glasses
• Sealant recommended by
countertop/vanity
manufacturer
Tape
Measure
2 Kohler Co.