Sanus accents ALT1 Manual De Instrucciones página 12

STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Mount wall plate
07
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
Minimum horizontal space between fasteners: 16 in. (406 mm)
1
Min. 16 in. (406 mm)
Level the wall plate template
12
directly onto concrete surface (no wall covering)
and tape in place.
06
Solid Concrete or Concrete Block Installation
2
06
3 in. (75 mm)
3/8 in.
(10 mm)
Drill pilot holes into solid concrete. Never drill into the mortar
BETWEEN blocks.
IMPORTANT:
3 in. (75 mm), using a 3/8 in. (10 mm) diameter drill bit.
Concrete Install Kit #CMK1 is not included
(see page 7) Contact Customer Service to
inquire about obtaining additional hardware.
Pilot holes must be drilled to a depth of
06