Tabla de contenido
Publicidad
1
Locate studs. Verify the center of the stud(s) using an awl, a thin nail, or
an edge to edge stud finder. Level the wall plate template
the hole pattern over the CENTERS of your studs, then tape in place.
Min.
16 in. (406 mm)
and align
06
2
06
1 in. (25 mm)
1/2 in.
(13 mm)
Drill pilot holes using a 1/2 in. (13 mm) diameter drill bit then
remove the wall plate template
06
.
06
15
Publicidad
Tabla de contenido
