Renaware Aqua Nano UCU LX-200 CAL Uso Y Mantenimiento página 7

c. Insert the Inlet Assembly tube (9) into the other end of
the Inlet Tube-to-Faucet Outlet Connector (6).
d. Insert the Spout Inlet Tube (marked with the
Red tape) into the narrower end of the Outlet
Tube-to-Faucet Connector (5).
e. Insert one end of the Outlet Extension Tube (3) into the open
end of the Outlet Tube-to-Faucet Connector (5). Make sure the
Outlet Extension Tube is inserted all the way into the connector.
12
f. Insert the
other end of
the Outlet
Extension
Tube (3) into
one end of
the Outlet
Extension Tube
Connector (4).
7. Install the filter cartridges: Hold the NanoCeram® Cartridge with the label end
up and place it into the locking plate on the base. Once inserted into the base
(11), rotate the NanoCeram® Cartridge clockwise slightly to lock. The Pre-Filter
Cartridge inserts into the locking plate at the top of the NanoCeram® Cartridge
the same way.
NOTE: Failure to install appropriate Pre-Filters will greatly reduce the life of the
NanoCeram® Cartridge.
g. Insert the
Outlet Line
of the Filter
Base (11) into
the other end
of the Outlet
Extension
Tube
Connector (4).