Whittier Wood Furniture 5340W Instrucciones De Ensamble página 4

3. Place a thin film of glue into the dowel holes found in the middle of the Top and insert the
Divider (D). Gently tap with a padded hammer and quickly wipe away any excess glue with
a damp rag. See Figure 3.
Fig. 4a
4. Place a thin film of glue into the dowel holes in the Bottom Assembly (F) and Left Side Assembly.
Fit the Bottom Assembly on the Divider and into the Left Side Assembly as shown in Figures 4 and
4a. Gently tap with a padded hammer and quickly wipe away excess glue with a damp rag.
Page 4 — 5340W — 10/10
Fig. 3
D
D
F
D
Fig. 4