Depress the pins before you line up the door to the front upper track.
11. To install the Left Door Assembly (H), press down on the buttons of the Upper Door Glides (M).
Place the rollers of the Lower Door Glide (L) into the bottom front track on the Bottom Assembly (F).
Gently push the top of the Left Door (H) until the Door is aligned with the upper front track. Reach
into the unit and push up on the release button on the left side of the Upper Door Glide (M). Slide
the installed and locked Right Door (I) to the left and reach into the unit. Push up on the release
button of the Upper Door Glide (M) on the right side so that the pin is locked. See Figure 11.
Roller
12. To adjust the doors, turn the screw in the middle of the Lower Door Glide (L) counterclockwise to
raise the door and clockwise to lower the door. See Figure 12.
13. Place the console at its final destination. Rotate the Small Adjustable Glides (P) found at the bottoms
of the legs until the unit is level. See Figure 13.
5340W — Page 8 — 10/10
Fig. 11
L
UP
DOWN
P
H
Adjustment screw
Fig. 12
P
Fig. 13