Trouble Shooting - GE RM24973 Manual De Instrucciones

Trouble Shooting

PROBLEM
Red light not blinking
when you press any
key.
The remote does not
operate
devices.
Not performing com-
mands properly
Problemsprogramming
a TV/VCR
Unit
VCR not responding
Problems
channels
No response
pressing a key
SELECT button not
responding
Flashing
Light
NOTE: Reprogramming should not be required after batter-
ies are removed.
your video
Combo
changing
after
Indicator
SOLUTION
A) Replace the batteries
with 2 new AAA
alkaline batteries.
B) Check if batteries are
properly installed.
A) Try all the codes listed
for your brand.
B) Try the Code Search
method.
Start Code Search over
again to locate the proper
code for full compatibil-
ity.
Try the VCR code for your
brand. Some combo units,
however,
both a TV and VCR code
for full operation.
As a safety feature on your
remote, you must press
the REC button twice.
If your original remote
required ENTER after a
channel, press ENTER
after you select a channel.
A) Make sure you have
new batteries and you are
aiming your remote at
your device.
B) Check that batteries are
properly installed.
Try using the DISPLAY
button to make the selec-
tion while in the Program
Guide.
Invalid Code for the
device. Check the Code
list and reprogram the
Remote Control.
Remote must remain
aimed at television
after sleep is set inor-
der for it to work.
12
may require