Programming With Code Search
If your TV, VCR, DVD player, DBS Satellite
System, Cable Box or CD player does not
respond after you have tried all the codes for
your brand, or if your brand is not listed, try
searching your code by following the steps
below:
1. Manually turn on the device you wish to
program.
2. Press and hold the
SETUP
INDICATOR
lights,
SETUP.
3. Press and release the
device
the device you are
programming.
INDICATOR LIGHT
will blink once, then
remain lit.
NOTE: For AUX program-
ming carry out program-
ming procedure on page
6 for the device you are
assigning to AUX prior to
starting a Code Search.
4. Press
ON•OFF until your
device turns off.
5. When your device turns
off, press ENTER, the
INDICATOR LIGHT will
turn off.
Identifying Codes From
until
LIGHT
then
release
button
and
release
the
for
The
7