Cleaning Modes - Samsung VR20T6001M Serie Guía Rápida

Cleaning modes

Auto
Pattern
Handy Cleaning mode & Product maintenance
How to use Handy Cleaning mode
Lift the main unit by the handle, and press the
Operation button twice quickly.
• To start the Handy Cleaning mode, make sure to hold the main unit sufficiently away
from any surrounding surface before pressing the Operation button twice quickly.
• When operating in the Handy Cleaning mode, all sensors are turned off.
• Do not place the main unit on the floor, table, or next to stairs, as it will bump against
walls without turning around and will not sense edges or drops, leading to product
Caution
damage.
• To exit the Handy Cleaning mode, press the Operation button on the main unit or
Start/Stop button on the remote control.
6
VR6000TM_QG_Mopping-Robot_NA_EN.indd 6
Edge Focus
Step 50min
Intensive
Manual
Press the Operation button if you want to stop
the Handy Cleaning mode.
2020-04-14 12:32:00