How The System Works - ZOSI W4 Guía De Inicio Rápida

03

How the System Works

The wireless NVR system consists of two parts. One is the NVR connected to the
monitor, and the other is the IP cameras installed. Both NVR and IPC need
independent power supply to work. Users can watch the real-time video captured
by each IPC on the monitor. These images will also be saved in NVR for later
playback at any time.
04
How to Connect the System
To ensure that the product can work normally, we recommend that you connect
the whole system before installation to see if there is any damage during
transportation.
How to connect the system:
1. Connect NVR to router using a network cable.
2. Connect monitor to NVR via HDMI or VGA port(VGA cable is not included).
3. Connect the included USB mouse to the top USB port of NVR.
4. Connect NVR to power supply (12V power adapter)
5. After the system starts, connect camera to the system (maximum support 8
channels).
6. The monitor will display live video of the camera.
04