Troubleshooting - Evolution R15VAC Instrucciones Originales

www.evolutionpowertools.com

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
Vacuum can not run
Loss of suction,
2. Clogged hose
wet pick-up
3. Clogged filter
Loss of suction,
2. Clogged hose
dry pick-up
3. Clogged filter
WARNING: To reduce the risk of injury from
moving parts and/or electrical shock, turn
power switch off and disconnect grounded
plug from electrical outlet before performing
troubleshooting checks. Minor problems often
can be fixed without calling customer service.
Make sure electrical outlet has voltage (a qualified
No electricity
electrician may need to be contacted)
1. Full tank
1. Full tank
11
CORRECTIVE ACTION
1. Drain and clean tank
2. Remove hose and clean debris
3. Clean or replace filter
1. Drain and clean tank
2. Remove hose and clean debris
3. Clean or replace filter
EN