Electrical Safety; Outdoor Use - Evolution R15VAC Instrucciones Originales

LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
Note: All or some of the following symbols may
appear in the manual or on the product.
SYMBOL DESCRIPTION
V
Hz
Min
-1
~ Alternating Current
n Rated Speed
Warning!
Read Instructions
Wear Safety Goggles
Wear Ear Protection
Wear Dust Protection
Wear Safety Gloves
Wear Safety Boots
CE Certification
UKCA Certification
GS Certification
Waste Electrical &
Electronic Equipment

ELECTRICAL SAFETY

This machine is fitted with the correct moulded
plug and mains lead for the designated market.
If the mains lead or the plug are damaged in
any way, they must be replaced with original
replacement parts by a competent technician.

OUTDOOR USE

WARNING: For your protection if this tool is to
be used outdoors it should not be exposed to
rain, or used in damp locations. Do not place
the tool on damp surfaces. Use a clean, dry
workbench if available. For added protection
Volts
use a residual current device (R.C.D.) that will
interrupt the supply if the leakage current to
Hertz
earth exceeds 30mA for 30ms. Always check the
operation of the residual current device (R.C.D.)
before using the machine. If an extension cable
Speed
is required it must be a suitable type for use
outdoors and so labelled. The manufacturers
instructions should be followed when using an
extension cable.
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS &
GROUNDING INSTRUCTIONS
When using an electrical appliance, basic
precautions should be always followed,
including the following: READ ALL
INSTRUCTIONS BEFORE USING THIS
APPLIANCE.
NOTE: Read all safety rules carefully before
attempting to operate. Retain for future
reference.
WARNING: Never operate this unit when
flammable materials or vapors are present
because electrical devices produce arcs or
sparks that can cause a fire or explosion.
NEVER LEAVE OPERATING VACUUM
UNATTENDED!
4
www.evolutionpowertools.com