Audiomedia NAV108E Instrucciones Para El Uso página 51

NAV108E Manuale d'uso- User's manual – Instrucciones para el uso
Brown = not in use
+12V
- Ground
Cable connections
Din 8 poles plug → AMV578/498 Din 8 poles socket
Yellow RCA plug → AMV578/498 Yellow RCA socket
White RCA plug → AMV578/498 white RCA socket
Red RCA plug → AMV578/498 red RCA socket
Green RCA plug → AMV578/498 green RCA socket
Blue RCA plug → AMV578/498 blue RCA socket
Red wire (pin1) → AMV578/498 brown Tel Mute cable
Black wire (pin1) → Not used
Mini Din 9 poles plug → NAV108E Mini Din 9 poles (7) socket
Mini Din 8 poles plug→ NAV108E Mini Din 8 poles (2) socket
Functioning
Start: "Disp" button
Vocal guidance : External speaker
Audio entertainment: Radio, TV, CD, DVD
Connection : RGB navi input
Control: Touch screen
NAV108E setting
If NAV108E is installed for the first time this
setting is not necessary because set as default
RF Remote control AMRC108 (ref. 554-20) or a
USM mouse connected with port 11 (not included
in the packing) are necessary for this setting
All manuals and user guides at all-guides.com
KIT AMV578/AMV497
Control with RF remote control
Red = Mute out
Clarital S.p.A Reggio Emilia – Italy www.clarital.it
ref. 548-59
Tel mute input
Touch/RGB
Black = not in
Video in 1 -
Impostazioni NAV108E
First part (touch screen setting)
Exit the navigation
Select "Setup"
Select "PANEL1"
Select "DV621"
Select "SAVE"
Confirm "OK"
Select "EXIT"
Re-start NAV108E turning off and on again the
car dashboard or removing the powere supply
from the NAV108E for 3sec.
Second part (Touch screen calibration)
Exit the navigation
Select "Setup"
Select "SYSTEM1"
Select "Calibration"
On the Clarion multimedia monitor press on the
"+" on the screen for the required 5 times on the 5
different position and at the end press exit
Pag 51
AMV578VD/AMV497D
GPS Antenna