English - HEINE CW1 Manual Del Usuario

HEINE Wall Charger CW1
Please read and follow these instructions for use and keep them for future reference.
Intended Use
The HEINE Wall Charger CW1 is intended only for charging the HEINE OMEGA 600 binocular
indirect ophthalmoscope.
The product may only be used by qualified medical personnel and in professional healthcare facilities.
For U.S. only:
Federal law restricts this device to sale by or on the order of a Physician or Practitioner!
Warnings and Safety Information
CAUTION! This symbol indicates potential hazardous situations. Ignoring the corresponding
instructions may lead to dangerous situations of mild to moderate extent. (Background color
yellow; foreground color black).
NOTE! This symbol indicates valuable advice. This notes are important, but no related to
hazardous situations.
Product overview
3
Fig. 1
1 Wall Charger CW1
2 Contact indicator
3 Charging pins
Assembly and disassembly
To ensure all-pole disconnection from the mains at all times, the ME device must be installed
so that the switch mode power supply is accessible and disconnectable.
Before mounting the device, check whether you need to use a special wall plug for the
subsurface of your wall and whether the subsurface exhibits sufficient load-bearing
capacity for the mechanical stress.
The wall plugs supplied with the device are universal wall plugs and suitable for most building
materials (e.g. concrete, solid brick, brick, plasterboard or gypsum cardboard).
Hold the drill template enclosed with your device horizontally in place on the desired position and
mark the drill holes. Mount the Wall Charger CW1 (1) according to the enclosed package insert.
To disassemble, disconnect the Wall Charger CW1 (1) from the mains first, loosen the lower screw,
push upwards and take off the wall.
6/44
2
1
3
4
4 Power supply
5 OMEGA 600
6 Charge status indicator
MED 234757
6
Fig. 2
5
2021-04-16

ENGLISH

1