Turning the alarm on/off
Top panel
Operations while playing back alarm sound
At the set time, the alarm sound is played back. During playback, the following operations are available.
Stopping the alarm for a short time (snooze)
Top panel
Turning the alarm off
Top panel
1
AUTO
2
SET
2
BEEP
1
1
SO
DIMMER
CLOCK
ALAR
USB
LABEL SIDE
VOLUME
SOURCE
ALARM
SNOOZE SLEEP
1
AUTO
2
SET
2
BEE
1
1
DIMMER
CLOCK
USB
LABEL SIDE
VOLUME
SOURCE
ALARM
SNOOZE SLEEP
1
AUTO
2
SET
2
BEE
1
1
DIMMER
CLOCK
USB
LABEL SIDE
VOLUME
SOURCE
ALARM
SNOOZE SLEEP
1
1
Press ALARM.
When the alarm is on, the alarm indicator (
and the alarm time is shown for a while. If you press ALARM
again, the alarm indicator (
When alarm mode is Weekly Alarm (☞ P. 18), the Weekly
Alarm indicator (
y
The alarm setting will be saved even if the alarm is turned off. If the
alarm is turned on again by pressing ALARM, the alarm will sound
with the previous alarm settings.
1
Press SNOOZE/SLEEP.
SNOOZE will stop the alarm and resume again in 5 minutes.
y
A
• When SOURCE + BEEP is set, press SNOOZE/SLEEP once to
stop the beep sound, and twice to stop the audio source. 4 minutes
after the audio source is stopped, it will start fading in again and after
another minute the beep sound will resume.
• The alarm indicator will flash when the snooze function is activated.
1
Press ALARM or
y
• The alarm stops automatically after 60 minutes unless you stop the
A
alarm.
• The alarm setting will be saved even if the alarm is turned off. If the
alarm is turned on again by pressing ALARM, the alarm will sound
with the previous alarm settings.
USING THE ALARM FUNCTION
) is shown,
) and the alarm will turn off.
) will also turn on/off.
.
17
En