GB
READ THESE SAFETY INSTRUCTIONS
Please read and understand all running/safety instructions before operating this machine.
BEFORE STARTING THE MIXER
-
DO NOT wear loose clothing or jewellery that may become entangled in the workings of
this machine.
-
Suitable clothing as follows should meet relevant EEC/local safety standards: overalls,
work boots, goggles, face mask, gloves and
ear defenders etc.
-
On electric powered mixers, ensure that any
trailing cable is protected against damage and
not liable to be tripped over or trapped
underneath the mixer.
-
Belle strongly recommends the use of a
Residual Current Device on 220/240v electrics.
-
Remove all packaging material before operating.
WHEN OPERATING THE MIXER
-
Keep engine housing lid open whilst it is mixing.
-
Keep unauthorised persons away from mixing drum.
-
Keep area around the mixer clear of obstructions
which could cause persons to fall onto moving parts.
-
Always ensure mixer is on level ground before mixing.
-
Ensure rear wheel brakes are applied before
operating the mixer.
-
DO become familiar with the controls before
operating this machine.
-
DO replace any worn/damaged warning decals.
-
DO ensure the drum is rotating while emptying
the mixer.
-
DO
the socket if leaving the machine unattended.
-
DO NOT transport this mixer when mixing.
-
BEWARE of the danger zones.
EMERGENCY STOP
See Operating Instructions Section for details.
FIRE FIGHTING
If you are in any doubt about the safety condition
of your machine, please consult your nearest Belle
dealer or Belle direct.
Safety Instructions
DO NOT FILL WITH FUEL OR
LUBRICATION OILS WHILST ENGINE
IS RUNNING.
DO NOT PUT ANY PART OF YOUR
BODY IN THE DRUM
DO NOT PUT SHOVEL IN THE DRUM
UNLOAD FROM THE TRANSPORT
CORRECTLY
8
DRUM ROTATES ANTI-CLOCKWISE
TIP MIXER DRUM FORWARD TO
DISCHARGE
ALWAYS MIX ON LEVEL GROUND
ALWAYS WORK WITHIN THE RATED
CAPACITY