Front Panel Display; Rear Panel - Yamaha TSX-B235 Manual De Instrucciones

Front panel display

1
1 Illumination sensor
Detect ambient lighting. Do not cover this sensor
(☞ P. 6).
2 Alarm time
Indicates the alarm time (☞ P. 19).
3 Repeat/shuffle indicator
Displays the playback mode (☞ P. 9).
4 Secondary indicator (TSX-B235D only)
Turns on if a secondary station is playing when you
listen to a DAB station.
5 Multi-function indicator
Displays various information, including the clock time,
information about the currently-playing track, and the
frequency of the radio station.

Rear panel

1 CLOCK switch
Sets the clock and specifies whether the clock will be
displayed (☞ P. 5).
SET: Set the clock.
ON: Even when the unit is off, the clock will be
displayed and the alarm function will be available.
OFF: When the unit is off, the clock will not be displayed
and the alarm function will not be available.
When the CLOCK switch is set to ON, the unit will be in
standby. When the switch is set to OFF, the unit will be in ECO
standby. (☞ P. 5)
2 AUX
Use a commercially available 3.5 mm mini-plug cable
to connect your external device here (☞ P. 9).
2 3 4
7 8 9
NAMES OF PARTS AND THEIR FUNCTIONS
5
~ ~ ~ ~ ~ ~
~ ~ ~ ~ ~ ~
6 Remote control signal receiver
Make sure that this sensor is not obstructed (☞ P. 1).
7 Weekly alarm indicator
Shows alarm information specified using the free "DTA
CONTROLLER" application for a smartphone and
tablet computer (☞ P. 21).
8 Alarm indicator
Turns on if the alarm has been set (☞ P. 20).
9 Sleep indicator
Turns on if the sleep timer has been set (☞ P. 21).
CLOCK AUX
ON FM ANT
SET OFF
1 2 3
3 DAB/FM antenna connector
Connect the DAB/FM antenna here.
FM ANT
Be sure to stretch out the antenna.
• If reception is poor, try changing the height or direction of the
antenna, or move the unit to find a location that has better
reception.
• If you use a commercially available outdoor antenna instead of
the supplied antenna, reception may be better.
6
(TSX-B235)
3
En