Heating Mode; Auto Changeover Mode; Fan Mode - LG VM122H6 NJM0 Manual Del Propietário

Heating Mode

1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Heating Mode.
• is displayed on the display screen.
3
Press or button to set the desired
temperature.
This mode removes excess moisture from a highly
humid environment or during the rainy season,
in order to prevent molding from setting in. This
mode adjusts the room temperature and the fan
speed automatically to maintain the optimal level of
humidity.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
• is displayed on the display screen.
NOTE
• In this mode you cannot adjust the room
temperature, it is adjusted automatically.
• The room temperature is not displayed on the
display screen.
• In the dehumidification mode, compressor and
indoor fan will not operate when the room
temperature is below 24 °C

Fan Mode

This mode only circulates the indoor air without
changing the room temperature.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the Fan
Mode.
• is displayed on the display screen.
3
Press FAN SPEED button to adjust the fan
speed.

Auto Changeover Mode

Cooling & Heating Model
This mode changes the mode automatically to
maintain the set temperature at ±2 °C.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the Auto
Changeover Mode.
• is displayed on the display screen.
3
Press or button to set the desired
temperature.
4
Press FAN SPEED button to adjust the fan
speed.
Cooling Only Model
This mode automatically sets the fan speed and
temperature depending on the room temperature.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the Auto
Operation.
• is displayed on the display screen.
3
Press or button to select the desired
operation code if the temperature is higher or
lower than the desired temperature.
Code
2 Cool
1 Cool slightly
0 Maintain room temperature
-1 Heat slightly
-2 Heat
NOTE
• In this mode, you cannot adjust the fan speed, but
Description
13