The battery endurance is
not the foreseen one
8. WARRANTY
• Grupo Sanz warranties this product for 1 YEAR from the purchase date being regularly reported
in the enclosed Warranty Sheet. The warranty right exists for any construction and material defect.
The warranty refers to a replacement of the faulty pieces. Anyway, only Grupo Sanz, who will each
time evaluate the different technical issues, is entitled to finally decide whether the warranty right
shall be applied or not.
• The warranty does not cover: labour costs, compensation for standstill of the machine, freight
costs, since such costs are totally charged to the customer. Moreover, the warranty right does not
cover any part subject to a normal wear due to the utilization of the machine, in particular the battery,
the battery charger, the hoses and tubes as well as the delivery accessories, shoulder straps, ON-OFF
cutout-switch.
• This warranty shall be considered as cancelled in case:
• the instructions for use, safety and maintenance recommended by manufacturer are not followed;
• the machine utilization is not the originally foreseen one;
• the troubles are caused by an improper use of the machine;
• repair or maintenance operations are carried out by non-authorized personnel;
• non-original spare parts are used;
• the verified fault is due to a poor maintenance/an improper use by the user and/or third parties.
IMPORTANT: this warranty will only be applied if the purchaser fills in the WARRANTY sheet IN EACH
PART and indicates the machine serial number, the purchase date (shall be the same as reported
on the sales document) as well as the dealer's stamp and transmits the sheet on the purchase date.
Moreover, the purchaser shall keep a copy of the sales document (receipt, invoice) and of the warranty
sheet: a copy of these documents shall be transmitted to an Authorized Dealer or Repairer together
with the machine to be repaired. Are the above mentioned documents missing, the warranty right is
not valid, at all.
9.DISMANTLING AND DISPOSAL
In case you decide not to utilize the machine, at all, and consequently to dismantle the machine, you
shall proceed according to the rules being in force and turn to specialist disposal centres, where both
materials and debris can be disposed of.
The machine consists of non-dangerous materials as follows:
• plastic material;
• ferrous metal (steel) and non-ferrous metal (aluminium – brass – copper);
• electric battery.
In any case, both the machine and its parts
shall not be disposed of as urban waste.
Battery endurance
reduction
No endurance
38
Charging time was not
enough
The battery charger is
faulty
The battery is exhausted
The fuse is burnt-out
The cable is disconnected
The battery charger is
faulty
The battery is exhausted
Recharge the battery
Replace the battery
charger
Replace the battery
Replace the fuse
Replace or repair the
cable
Replace the battery
charger
Replace the battery