Bosch KTS 340 Manual Del Usuario

KTS 340 Quick Setup, Licensing and Update
Step 1 (Important!)
Save your ESI[tronic] packing slip and/or confirmation
email that you received after registration. It contains
your customer no. and password.
Step 4
Log on for Licensing by entering your ESI[tronic]
customer no. and your personal password (see Step 1).
Note
You are always able to update your KTS 340 online for the time you have a valid subscription license established with your personal customer no. and password.
2213524 06/08/2010 | 1689989075 | BOSCH is a trademark licensed by Robert Bosch GmbH and/or its affiliated entities. © 2010 Robert Bosch LLC, USA. All rights reserved.
You will find detailed descriptions of the following steps in the KTS 340 User Manual, which is part of this Base Kit.
The KTS 340 Getting Started video will show you the basic functions of the tool.
Important Note
Your KTS 340 comes pre-installed and licensed. In order to install further updates, you need to license your KTS 340 with your personal ESI[tronic]
Customer No. and Password within the next 30 days.
If not yet done, please fill out the Registration Request Form and fax or mail it to Bosch Customer Service.
You will receive an email containing your ESI[tronic] customer no. and your password, needed for online licensing and receiving online-updates.
Step 2
Install the ESI[tronic] Startcenter Software on
your PC or laptop.
Step 5
Select your available ESI[tronic] license and
generate your personal KTS 340 license code.
Step 3
Connect your KTS 340 to the PC — go to the Startcenter
Menu Licensing Online.
or
Step 6
Update your KTS 340 if a newer software release is available. New
releases are available online or via DVDs you receive in the mail.