Connecting Power To The Mount - Garmin AMPS Rugged Mount Manual De Instrucciones

Connecting Power to the Mount

If any wire is left unconnected, insulate the wire and safely secure it on your
vehicle.
1. Select a location to mount the Montana on your vehicle, based on available
power sources, safe cable routing, and that the driver view is not obstructed.
2. Connect the red
Volts).
3. If necessary, connect the serial data wires to your vehicle.
• Yellow
➌
• Blue is the serial data output wire.
➍
• Green
➎
4. If necessary, connect the audio jack
AMPS Rugged Mount Instructions
and black
➊
is the serial data input wire.
is the serial ground wire.
notice
wires to your vehicle's main power (10 to 50
➋
.
➏
➏
➊
➋
➌
➍
➎
EN-3