Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our CHAUVET Professional line of mounting
clamps, go to http://trusst.com/products.
Mounting Diagram
Mounting Clamp
Threaded Mounting
Hole Size M12
Control Panel Description
BUTTON/
FUNCTION
KNOB
<FUNCTION>
Enters the programming mode
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
<TIMER>
Starts the timer controlled operation
<MANUAL>
Manual haze output
<VOLUME
Controls the haze volume,1-100%
KNOB>
<FAN KNOB>
Controls the fan speed, 1-100%
Menu Map
Main Level
Interval Set
Duration Set
DMX
DMX Values - 2CH
Channel
Function
1
Fan Speed
2
Haze Volume
AmHaze Stadium QRG Rev. 4
QUICK REFERENCE GUIDE
Safety
Notes. Use at least one mounting point per product. Make sure the
Rubber Feet (x4) for
Programming Levels
10-300 Seconds
10-255 Seconds
001-512
Value
000
005
006
255
000
005
006
255
floor mounting
Description
Sets the interval between haze output
Sets the duration of the haze output
Selects the DMX starting address
Percent/Setting
No function
Fan speed (slow to fast)
No function
Haze volume 1-100%
EN
Safety Cable
Haze Knob
Fan Knob
3