Resumen de contenidos para Black Box 2-1 FiberSwitch
Página 1
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX SUPPORT FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
Página 2
FEDERAL COMMUNICATIONS COMMISSION CANADIAN DEPARTMENT OF COMMUNICATIONS RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer=s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment.
Página 3
2-1 FiberSwitch ____________________________________________________________________________________________________ NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
Página 4
2-1 FiberSwitch ____________________________________________________________________________________________________ Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación. Servicio por personal calificado deberá ser provisto cuando: El cable de poder o el contacto ha sido dañado; u Objectos han caído o líquido ha sido derramado dentro del aparato;...
2-1 FiberSwitch ____________________________________________________________________________________________________ Specifications Compliance FCC Part 15 Subpart J Class A Entela Certified to UL Safety Standard 60950 Interfaces Comply with FDDI PMD and LCF-PMD Standards Comply with ATM 100Mbps Physical Layer Comply with 100 Base-FX Version of IEEE 802.3u...
Ensure that any applicable repeater rules are followed when configuring networks with the 2-1 FiberSwitch. The 2-1 FiberSwitch is available in two models for cable segments using ST or SC style fiber connectors. Supported network protocols include ATM, Fast Ethernet 100 Base-FX and FDDI. A traditional rotary style switch with LED indicators is used to select and confirm the desired segment pairing.
Model DSA-0151D-05). This power supply satisfies the applicable UL safety standard 60950 that requires isolation from the AC power source as well as proper grounding. To install the 2-1 FiberSwitch, simply insert the small barrel connector from the DC supply into the mating receptacle on the rear panel and then connect the power supply to AC power using the provided cord.
Troubleshooting Calling Black Box If you determine that your 2-1 FiberSwitch is malfunctioning, do not attempt to alter or repair the unit. It has no user-serviceable parts. Contact Black Box Technical Support at 724-746-5500. Before you do, make a record of the history of the problem. We will be able to provide more efficient and accurate assistance if you have a complete description, including: •...